Filter by volume:
All
0l - 15l
16l - 30l
31l - 45l
46l - 60l
61l - 70l
> 70l
Deuter Aircontact Lite System
- Stabiliser straps allow optimal positioning of the backpack.
These are easily repositioned on the shoulder straps using a “Triglide“
buckle.
- Breathable padding with special ventilating hollow chamber
foam: With every movement, a pump effect circulates air through the
breathable Aircontact cushions of this direct body contact system. Extra
air channel ventilation between the back cushions is very effective.
- The anatomically shaped hip fins are made from multiple
layers. The inner side has a layer of soft foam with 3D AirMesh lining
for heightened comfort. The firm foam on the outside is modelled to the
anatomic shape and transfers the load to the hips. Side compression
straps on the fins regulate the load and increase stability. On the
compact ACT Lite fins this bilaminate construction is perfectly balanced
between weight reduction and load transfer ratio. Aircontact models
designed to carry heavier loads, maximise stability and load transfer
thanks to the additional synthetic reinforcement in between foam
layers.
- The anatomic profiled X-frame offers a balance of torsional
rigidity and flexibility to follow your body movements, and transfers
weight through it's perfect back fit.
- Contoured shoulder straps with 3D Air mesh lining.
- Vari-Quick system for easy adjustment to any back length.
Deuter Aircontact System
- Stabiliser straps allow optimal positioning of the backpack. These are easily repositioned on the shoulder straps using a “Triglide“ buckle. Aircontact models above 50+10 SL sizes also have two different fixing points, depending on the back length setting, in order to optimize the load adjustor strap angle.
- Breathable padding with special ventilating hollow chamber foam: With every movement, a pump effect circulates air through the breathable Aircontact cushions of this direct body contact system. Extra air channel ventilation between the back cushions is very effective. (on ACT Lite)
- The anatomically shaped hip fins are made from multiple layers. The inner side has a layer of soft foam with 3D AirMesh lining for heightened comfort. The firm foam on the outside is modelled to the anatomic shape and transfers the load to the hips. Side compression straps on the fins regulate the load and increase stability. On the compact ACT Lite fins this bilaminate construction is perfectly balanced between weight reduction and load transfer ratio. Aircontact models designed to carry heavier loads, maximise stability and load transfer thanks to the additional synthetic reinforcement in between foam layers.
- Head molding provides freedom of head movement. Effective on models Aircontact 50+10SL and up.
- Contoured shoulder straps with 3D Air mesh lining.
- Vari-Quick system for easy adjustment to any back length.
- The anatomic profiled X-frame offers a balance of torsional rigidity and flexibility to follow your body movements, and transfers weight through it's perfect back fit.
- All Aircontact models are fitted with Deuter’s Vari Flex System, leaving the generous hip fins fully mobile. The Vari Flex hip fins follow even the most complex movements allowing tricky sections to be negotiated without losing your balance – especially important when carrying a hefty load.
Deuter Aircontact Pro System
- Breathable cushions with ventilating Aircontact technology and durable 3D AirMesh lining wicks away warmth and moisture.
- Two ergonomically formed V-shape multi-chamber aluminium stays, direct part of the load from the back to the hips.
- When fastened, the hip fins taper upwards in a conical form. The fins are concave and ultra-padded and sit perfectly on the hips. The multi-layered, PE-stiffened foam spreads the load evenly. The ‘pull-forward’ function makes the hip belt easy to fasten, even with even heavy loads.
ements allowing tricky sections to be negotiated without losing your balance – especially important when carrying a hefty load. - Height adjustable load transfer straps on the shoulder straps for precision pack positioning.
- Contoured shoulder straps with 3D AirMesh lining. Heavy duty construction with special dual layer foams.
- With the simple Vari Fit system you can easily adjust the pack to the individual’s back, making for a perfect fit every time.
- Deuter’s Vari Flex system certainly defines the flexibility of this carrying system. The pivoting hip fins follow complex body movements. Thus, the load can be evenly distributed to the hips, providing freedom of movement and reducing fatigue. Two sturdy GRP-rods and load adjustment straps on the hip fins allow for precision load control. The Vari Flex system and aluminium stays form the core of the carrying system, which combines stability, efficient load transfer, perfect load control and incredible flexibility.
Deuter Aircomfort Futura System
- Contoured, softly padded shoulder straps and hip wings covered with breathable, soft Wide Air Mesh.
- Flat spring steel frame provides a flexible, light structure, tensions the mesh and is extremely durable.
- The special suspended mesh provides convincing back ventilation: the hot air dissipates freely from three sides.
- Stabiliser straps allow exact positioning of the rucksack.
- Futura 22 & 28: Ventilation pads for carry comfort. Futura 24 SL – 32: The compact, ergonomically shaped hip fins have close set anchor points, which gives a snug fit and spreads the load effectively to the hips.
Deuter Aircomfort Pro System
- Contoured, softly padded shoulder straps covered with breathable Wide Air-Mesh.
- The round, durable spring steel frame is extremely lightweight and flexible. It tensions the mesh and provides fantastic freedom of movement and a perfect fit.
- Side compression straps on the hip belt stabilise the pack.
- The System is a fantastic comfort combination: the back mesh guarantees excellent ventilation since air can pass through without restriction; the floating, ergonomically formed Vari Flex hip belt follows each and every movement and thus helps saving energy.
- Ultra-flat shoulder strap anchor point with ventilation holes.
- Stabiliser straps allow exact positioning of the rucksack.
Deuter Aircomfort Vario Pro System
-
Das Vari Fit System ist schnell und stufenlos verstellbar und erlaubt so
eine genaue Anpassung an die Rückenlänge des Trägers. - Der neue Rundprofilrahmen aus dauerelastischem Federstahl zeichnet sich durch seine unkomplizierte, leichte und biegsame Konstruktion aus. Nahezu unverwüstlich gibt er dem Netz seine feste Spannung und überträgt die Last auf den Hüftgurt. Sein angenehm flexibles Trageverhalten sorgt für Bewegungsfreiheit und perfekten Sitz.
- Anatomisch geformte Schulterträger mit komfortablem Wide Air-Mesh Bezug verteilen das Gewicht gleichmäßig. Das Rückennetz garantiert eine hervorragende Belüftung, da die feuchte Luft ungehindert abziehen kann. Lageverstellriemen erlauben eine exakte Rucksackpositionierung. Der bewegliche Vari Flex Hüftgurt ermöglicht den kraftsparenden Transport mittlerer Lasten, da er souverän den Bewegungen des Trägers folgt. Die ergonomisch geformten Flossen aus Bilaminatschaum mit PE-Versteifung bringen die Last auf die Hüften. Die Innenseiten sind mit komfortablem Wide Air-Mesh bezogen.
Deuter Aircontact Trail System
- Stabiliser straps allow optimal positioning of the backpack.
- Contoured shoulder straps with 3D Air mesh lining.
- Additional ventilation channel between the Aircontact cushions.
- Two Aircontact pads in special breathable hollow-chamber foam distribute the load evenly. The Aircontact pads perform a pump effect, whereby every movement prompts the exchange of air, resulting in optimum back ventilation. The result: 15% less perspiration than with previous body-contour packs.
- Anatomically formed hip fins for freedom of movement and body-hugging carrying.
- Flexible, tensioned Delrin® U-shaped frame provides stability with little extra weight. It follows the most varied movements with absolute ease. The frame combines with the body-hugging fit of the pack to create a comfortable yet compact carry system with even load distribution and effective load transfer.
Deuter Alpine Back System
- Load adjustor straps on the shoulder straps and hip fins serve to fine-tune the load according to the terrain: loose > more ventilation and mobility; tight > more control and a more compact fit.
- Guide: X-frame system with curved profile aluminium stays, provides exceptional flexibility and weight carrying ability.
- Removable insulating sitting mat stabilises the back.
- Anatomic hip belt with bilaminate foam for comfort, flexibility and weight transfer.
- Rise, Freerider Pro & Guide: The pivoting Vari Flex hip fins follow complex body movements. Thus, the load can be evenly distributed to the hips, providing freedom of movement and reducing fatigue. Removable for weight reduction. Also separately removable waist belt (Guide, Rise).
- Cruise, Guide Lite & Rise: Flexible, tensioned Delrin® U-shaped frame provides stability and effective load transfer with little extra weight. It follows the most varied movements with absolute ease.
- Contoured, comfortable 3D Air-Mesh lined shoulder straps.
- Two padded foam stripes that provide carrying stability and comfort with „chimney” effect ventilation between the stripes. The breathable 3D AirMesh is used on all points of contact, and is very durable.
